Loading... Please wait...

Our Newsletter





Pho-Reel™ Plus Camera Shoulder Strap System

  • Pho-Reel Plus alone with no camera or accessories attached.
  • Pho-Reel Plus with Nkon camera attached with base plate.
  • Pho-Reel Plus with camera connected to the reel using camera body strap lugs.
  • Pho-Reel Plus comes with tether straps.
  • Pho-Reel with Nikon camera and padded tripod case Pho-Pod. Adjust the tether straps to get the best fit & comfort.
  • Pho-Reel with camera and Pho-Pod padded tripod quiver adjusted to hang higher.
  • Pho-Reel with a small camera case.
  • Pho-Reel connected to a smaller camera.
  • Pho-Reel Plus standard components.
  • Underside of the camera strap showing the dense webbing that pulls away heat and moisture from your shoulder.
  • E- Brochure gives overview of Pho-Reel Plus camera shoulder strap system. Please the image shown is two straps that are purchased separately.
  • Pho-Reel with just the Pho-Pod tripod case.
  • PhoReel with a tripod carried using the tether strap & loops. To prevent hard contact,  do not carry a camera in this configuration.
  • Pho-Reel and Pho-Reel Plus worn with double straps for more "change options." Pho-Reel shown with embroidery option and Pho-Reel Plus shown with a camera on the reel and a Pho-Pod tripod quiver. Please note the image shown is two straps that are purchased separately.
  • Back view of wearing double chest  straps and Photipherals Pho-Pod tripod case lashed to Pho-Reel Plus. Please note that each shoulder strap and Pho-Pod is a separate product that is purchased separately.
  • Pho-Reel and Pho-Reel Plus with optional chest strap and IonosGear "portable clean room." IonosGear (sold separately) assembles in a minute to provide a dust free environ for lens changing. Please note that each shoulder strap is a separate product that is purchased separately.
  • Pho-Reel and Pho-Reel Plus with optional connector (chest strap) with PhorMat ground cover and Pho-Pod tripod carrier (each sold separately) connected to the "plus." Each shoulder strap is a separate product that is purchased separately.
  • There are several was to attach your camera to the custom clip & reel mechanism. Additional plates are sold separately, but the unit comes with the strap.
  • Lens ring mounting. Lens mounting ring does not come with the unit.
  • Woodland camouflage option (no additional cost)
  • Pho-Reel Plus gives you versatility and improved mobility carrying camera gear into the field.
  • In the field with Pho-Reel Plus and tripod set up. Note: The straps are sold separately and not as a set.
  • Carry your gear into the field with comfort and mobility.
  • Pho-Reel Plus with Pho-Reel as duals The straps are sold separately and not sold as a set.
Price:
$95.00
Weight:
1.00 LBS
Rating:
Availability:
Product ships in two working days.

Choose Your Options



Product Description

Pho-Reel™ Plus: More than hands-free mobility, it’s an assistant at your side all day.

The patent pending design provides hands-free mobility and comfort. No more neck pain from your camera strap. No more fear of the strap sliding from your shoulder. You can quickly move your camera into place, from side carry, to eye or tripod for shooting.  Optional accessory cases for lenses and filters slide into the harness. With the “Plus” version carry your tripod “hands free” or other camera gear in padded cases. Worn in pairs with Pho-Reel or another Pho-Reel Plus and now you can carry two cameras. Note: The price reflects a single Pho-Reel Plus strap.

Special features:

  • Asymmetrical padded shoulder strap distributes weight evenly.
  • The underside is lined with military-standard nylon mesh to promote wicking, dissipate body heat, and provide additional padding without adding weight.
  • Chest strap prevents shoulder strap from slipping.
  • Two foot (610mm) locking retractable vinyl coated steel cable allows ease of shooting either hand held or from tripod but avoids camera swing in retracted position while walking. 
    • Note: Cable actuates at the push of a button. ALWAYS hold the camera with a little tension when extending or retracting the cable. If the camera is unclipped from the reel, hold the Bozeman clip while retracting or extending the cable.
    • A clear poly-olefin shrink-tube is included for covering the stainless steel mounting barrel (upper portion) of the clip for those concerned about additional protection.
  • Your order includes one custom-sized base plate and mounting screw. Additional plate and screw are available for purchase. Please make sure you select your camera body.*
  • Cameras with battery grip require a side mounting clip that is wider and longer. Also, the side mounting clip is used for carrying by the lens ring for better balance of a camera with telephoto lens.
  • There are three attach & carry options:
    • Base plate mounted directly to camera body with provided screw/washer.
    • Base plate mounted either into the camera body or a telephoto lens ring using your tripod mount—making your camera always tripod ready.
    • Most camera’s strap bracket/ring will take our custom designed stainless steel clip
  • Harness has accessory loops front and back for carrying small accessories cases:
    • Extendable lens case by Photipherals
    • Large professional filters’ pouch by Photipherals is also convenient for stowing lens cap, phone, and keys.
  • Pho-Reel Plus comes with additional mounting clips and hanging straps with latching connectors giving you versatile carry options: small after-market camera bag and other Photipherals accessories and equipment.
    • Use only padded accessory cases or soft items on tether straps when carrying a camera on the reel to avoid the camera making hard contact.
    • PhorMat: waterproof ground cover
    • Pho-Pod: tripod case worn scabbard-style for quick access to your tripodIonosGear: like having a portable clean-room for lens changing to prevent sensor dust
  • Optional connecting straps allow joining two units together as a double strap. Or, wear two straps with separate chest straps for the ability to remove one while continuing wear one.

Made in the USA.

Dimensions:

Harness: 22.5 inches/ 571.5 mm long x 3.1inches/78.74mm wide

Reel:  2.75 inches/70mm wide x 4.33 inches/110mm long x 1 inch/24mm at widest point

Lashing Strap: fully extended is 20 in. long and includes D-rings made of reinforced nylon

Weight: 9.2 oz./ 260g (with lashing straps)

View Accessories Here

I Want to Order Additional Base Plates


Find Similar Products by Category


Write your own product review

Product Reviews

  1. No other like it, love it! 5 Star Review

    Posted by on 1st Feb 2013

    Wow, I can walk the dog and carry my gear! Long nature walks with all my stuff ready to use is awesome.